NF D63-011/A1-2002 成卷墙壁纸.尺寸、平直度、防水性和耐洗涤性测定

作者:标准资料网 时间:2024-05-07 07:39:12   浏览:9137   来源:标准资料网
下载地址: 点击此处下载
【英文标准名称】:Wallcoveringsinrollform-Determinationofdimensions,straightness,spongeabilityandwashability.
【原文标准名称】:成卷墙壁纸.尺寸、平直度、防水性和耐洗涤性测定
【标准号】:NFD63-011/A1-2002
【标准状态】:现行
【国别】:法国
【发布日期】:2002-04-01
【实施或试行日期】:2002-04-05
【发布单位】:法国标准化协会(AFNOR)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:
【摘要】:
【中国标准分类号】:Q18
【国际标准分类号】:91_180
【页数】:5P;A4
【正文语种】:其他


下载地址: 点击此处下载
基本信息
标准名称:现场设备、工业管道焊接工程施工质量验收规范
中标分类: 工程建设 >> 工业设备安装工程 >> 金属设备与工艺管道安装工程
发布部门:中国工程建设标准化协会
发布日期:2011-02-18
实施日期:2012-05-01
首发日期:
作废日期:
出版社:中国计划出版社
出版日期:2012-05-01
适用范围

本规范适用于碳素钢、合金钢、铝及铝合金、铜及铜合金、镍及镍合金、钛及钛合金、锆及锆合金金属材料焊接工程施工质量的验收。

前言

没有内容

目录

1 总则 2 术语 3 基本规定 4 材料 5 焊前准备 6 焊接 7 焊后热处理 8 焊缝质量检验 附录 本规范用词说明 引用标准名录 附:条文说明

引用标准

没有内容

所属分类: 工程建设 工业设备安装工程 金属设备与工艺管道安装工程
【英文标准名称】:Compressionandinjectionmoulds-Componentsforgatingsystems-Terms
【原文标准名称】:压模和注模.浇注系统部件.术语
【标准号】:DIN16769-2005
【标准状态】:现行
【国别】:德国
【发布日期】:2005-02
【实施或试行日期】:
【发布单位】:德国标准化学会(DIN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:热固性聚合物;注塑模;模制材料;材料;热塑性聚合物;工具;元部件;进料管;术语;定义;喷射铸造法;塑料
【英文主题词】:feedbushes;injectionmoulding;materials;thermosettingpolymers;thermoplasticpolymers;injectionmoulds;definition;terms;definitions;components;mouldings(shapedsection);tools;plastics
【摘要】:Thisstandardspecifiestermsanddefinitionsforcomponentsofspruesystemstobeusedininjectionmouldsfortheprocessingofthermoplastics,thermosettingplasticsandelastomers.Thesearespruesystemsforsettlingspruesinmouldswithexternalheating,internalheatingandcoldrunnermoulds.Thecomponentsandexamplesmountingarrangementsofthevariousspruesystemsareshowninfigures1to28.Allfiguresareexamplesandnotbindingforthedesignoftheinjectionmoulds.Thepurposeofthisstandardistointroducecoherenttermsforthevariousspruesystemsinprofessionalterminology.
【中国标准分类号】:J62
【国际标准分类号】:25_120_20;01_040_25
【页数】:11P;A4
【正文语种】:德语